Questions & Answers for: install a coolant reservoir

...and clamp to degas bottle. Position power steering oil reservoir onto degas bottle and install retaining screws securely. Connect radiator overflow hose and engine coolant vent hose to degas

Ad

...Install coolant reservoir. Install oil reservoir for servo pump. Follow-on work, 6-cylinder Fill up coolant. Warm the engine until the thermostat opens. Switch engine oft and check the level. Re-fill ...

Ad

install and my problem is now fixed. Air was getting into the system through the small crack in the valve further complicating the system operation. No I think you have a crack in the head or block of

Question about 2001 Jimmy

2 Answers

...Install the coolant reservoir. Install the PCM. W/ Air Conditioning Blower Motor (W/ Air Conditioning) To Remove: Remove the PCM. Remove the coolant reservoir. Remove the rear coolant recovery ...

...Install the coolant reservoir. Install the PCM. W/ Air Conditioning Blower Motor (W/ Air Conditioning) To Remove: Remove the PCM. Remove the coolant reservoir. Remove the rear coolant recovery ...

...install retaining screws securely. Connect radiator overflow hose and engine coolant vent hose to degas bottle. Fill and bleed engine cooling system as described. Check for coolant leaks and proper ...

...I would highly recommend calling your local ford dealer to see if the low coolant sensor is serviceable (i don't think it is) and if not replacing the reservoir with an O.E. one from

Question about 1989 ZXR 400

1 Answer

...Stop the engine and add coolant up to the radiator filler neck.- Install the radiator cap.- Fill the reservoir tank up to the upper level line with coolant and install the cap.I hope this

...coolant reservoir alittle I can hear air and the coolant coming into the reservoir. I tighten the cap, start the car, and the temp is normal again, and drives OK until it is cold again. Has coolant ...

Question about 1989 ZXR 400

1 Answer

...install coolant reservoir Drain the reservoir, & clamp coolant lines. Remove coolant lines to reservoir. Depending on location, generally it involves 2 to 3 screws that hold it on the vehicle ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...