Questions & Answers for: install alternator

...Install the alternator shield (4.0L engine). Connect the alternator electrical connectors. Install the accessory drive belt. Connect the negative battery cable. 4.6L Engines (Non-Supercharged) Before ...

Ad

Question about 1994 Caravan

1 Answer

...Install the alternator in position on the engine and connect the electrical leads. 11. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm). Install the power ...

Ad

Question about 2000 Expedition

1 Answer

...install 3 alternator retaining bolts. Tighten the bolts to 18-22 ft. lbs. (20-30 Nm). Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley. ...

...Install the alternator belt and adjust the tension until a deflection of 0.24-0.31 inch (6-8mm) deflection with 22 lbs. (10 kg) of pressure exerted when installing a used belt. On a new belt the belt ...

Question about 1994 Caravan

1 Answer

...Install the alternator belts and adjust to specification. Tighten all the support bolts and nuts. Connect all of the wiring terminals to the alternator. Connect the negative battery cable. 3.0L ...

...Install the alternator on the engine. Tighten the lower and right brace bolt to 18 lb-ft. (25 Nm) and the left brace bolt to 35 lb-ft. (48 Nm). Connect the wiring to the alternator. Install the degas ...

Question about 1994 Voyager

1 Answer

...install: Position the alternator against the engine. Install the pivot bolt and nut. Install the mounting bracket bolts, and adjusting bolt. Install drive belts and adjust to specification. Tighten ...

...Install alternator. Install upper bolt mounting bolt. Install 2 lower mounting bolts. Tighten bolts to 48 ft. lbs. (65 Nm). Install B+ terminal nut and wire. Tighten nut to 115 inch lbs. (13 Nm). ...

Install the alternator to the alternator bracket. Install the alternator bolts. Tighten the alternator bolts to 37 ft. lbs. (50 Nm). Install the drive belt. Install the alternator electrical connector

...Install the alternator brace stud through the alternator flange and the bracket and tighten the brace stud to 22 ft. lbs. (30 Nm). If equipped with the CS 144 alternator, install the inboard ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...