Questions & Answers for: insinkerator button stuck

button, nothing. Is it possible that I need a new Insinkerator "sink top switch" box that the electrical is in? Yes. It is possible. Is the push button in with this switch box? Because the push button

button should be pushed to reset the device. If the blade is stuck, the reset might not work but just keep tripping the breaker so you have to free up the blades with a broom stick or other item stuck

InSinkErator 1/3 hp has cloth stuck beneath blades. Does not turn. Can I fix? peeling potatoes for Thanksgiving and now my disposal will not work. Yes, have tries reset button and not working. When it

...insinkerator is jammed . We tried the reset button but it is still stuck. The reset button pops when the GD is stuck. Do you know where the allen wrench is that came with it? If not, you need one. ...

...on the garbage disposal underneath unit, red button. Also you should have a wrench that came with unit, it goes in hole under unit in center, you need to turn, to make sure nothing is stuck in

Insinkerator stopped working. Cutting plate rotates freely. tHE RESET BUTTON IS STUCK IN THE "ON" POSITION. If the reset button is stuck in the on position and can not be reset, the motor ...

...reset button but disposal still only humm Sounds like there is something stuck in the impeller...make sure you unplug/disconnect the power from the unit before you try to remove the foreign ...

my Emerson TV is stuck on demo mode and wont read the HDMI cable leading from the PS3 to the TV how do I take my tv off Demo mode I don't think you will get an answer to this listed in plumbing ...

insinkerator badger 5, 5/8 hp reset button stuck and water licking from there Replace disposal http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html ...

InSinkErator G.D. motor has a reset button on the end bell or bottom, push in to reset. G.D. motor circuit breaker is in middle position when tripped, turn to off position, then to on to restore power