Questions & Answers for: PC Chips input signal range change settings

...change the P4 for a PentiumD at 3,2 GHz, but the bios can not boot. When I try to turn on, there is not video signal, and there is not the beep sound. What I have to do? if you go to the link below ...

...change settings hmm this problem as made me very tired...also looking for some help as been slim well any one that can help me you would be a life saver so ya laterzzz for now...need sleep for a bit ...

...signal to the monitor, we just change the power supply to see if that could be it but it is doing the same thing. have you tried different video card? try to use the onboard videocard of your ...

...1680 by 1050. Originally, that mode wasn't even available. I have updated the driver and not I can select it, but the screen then goes blank for a few seconds (and then come back to the old res.) ...

Hi, I want to add a 750gb hdd to my PCCHIPS K8M800 M861G V1.6 Motherboard. I already have a 200 gb connected with the OS etc on. When I try to boot it keeps recycling through the POST. Can anyone help

there is no video output both onboard video card, the screen is black and no signal hi try to check if your ram is ok on the motherboard try to change it of dimm and switch on

my cpu has no video signal during starting on my cpu has no video signal during start up check all the cables are connected correctly.

...change from on-board to AGP settings or plug the graphics card in, take out the motherboard battery and the power cord from the back, leave it for 20 minutes and put them all back again. This will ...

...change your settings there you can also tick in the box place icon in taskbar if his does not fix the problem have you tried this control panel sounds and audio,volume,advanced,speakers select the ...

...change your settings there you can also tick in the box place icon in taskbar if his does not fix the problem have you tried this control panel sounds and audio,volume,advanced,speakers select the ...