...input and output drivers in the 'Sounds and audio devices' setup in the Control Panel. Sound plays well through the UGC102, but the input doesn't appear to be working i.e.I can't get anything from my ...
Question about Xenyx 1832fx Mixer 18 Input 32 Bus with Efx USB
...form computer to board using USB works but the signal for input doesn't work In the control panel, "sounds and audio devices" under the "voice tab" make sure the INPUT is set to the Xenyx
input device in protools? Early versions of Pro Tools do not support Behringer devices. The newly released Pro Tools 9 can be calibrated through the Pro Tool Aggregate I/O in your audio/midi settings.
...Clip Inidicator and how to deal with clipping. Clipping in this amp isprimarily a function of the input signal being distorted so the input level is recommended to be lowered. Beyond that the cause ...
what imput do i use for on/off footswitch Sorry, this device does NOT have a footswitch input to control the effects processor. I would suggest using an external effects unit that does have a foot ...
Question about PMP2000 800 Watt 10 Channel Powered
input for higher output devices. Saturating the input(s) will cause bad distortion. Observe if any of the clip indicators are coming on. If they do, then use the pad buttons. If they still come on due
Question about Xenyx 502 Audio Live Music Mixer New!
...(Sterling Audio ST51) is giving me a buzzing on playback. But when I run other devices through the inputs such as an MP3 player through all the inputs including the CD/TAPE rca inputs there is no ...
...devices (CD's/Tapes) through the mic selection on the computer and it works well. Is there something I am missing to be able to record from the mic in addition to other line inputs on the ...
Question about Xenyx 802 8-input 2-bus Mixer W/ British Eq !
my behringer xenyx 802 premium 8-input mixer worked fine for 1 day but now it sounds watery and behringer support was no help at all behringer told me by email to send receipt and they would give me ...
Question about Xenyx 1202fx Mixer 12 Input 2 Bus with Efx
...There are many causes of buzz, so it should be checked step by step : - Bad connection on the input connector, or cord. - Amplifier, basically have the block diagram like this: If in one block ...
Usually answered in minutes!
26 Questions
17 Questions
15 Questions