Questions & Answers for: LG WM inlet water valve

Question about WM-2277HW Front Load Washer

1 Answer

inlet hose plugged. Frozen water supply pipe(s). No power to washer inlet valve(s). Old inlet hoses with separated layers, blocking water flow under pressure. Turn off valves, remove from machine end,

Ad

Question about WM-2277HW Front Load Washer

1 Answer

...inlet screens are clogged up. ? Check if water has enough pressure. If so, find out its contributors. ? Check if there is any frozen area in the unit if in cold climate. (Drain Hose, etc) Measure the ...

Ad

Question about WM1814CW Front Load Washer

1 Answer

water inlet error. Correct water level is not reached within 8 minutes after water is supplied or it does not reach the preset water level within 25 minutes. Make sure water supply tap is open and not

Question about WM-2277HW Front Load Washer

1 Answer

water inlet valves at the top of the machine are leaking. My manual does not list the part and i need to replace it. I dont know the correct part name or number Water Inlet Valve Replacement Procedure

Question about WM2233H Front Load Stacked Washer / Dryer

1 Answer

...water inlet valve has failed. They tend to get debris inside and not seat properly. You will need to replace the water inlet valve. They are usually not to expensive and easy to replace. Here is a ...

Question about WM2455 Front Load Washer

1 Answer

...water inlet valve or clogged inlet screen. Please check the water line for any clogs/obstructions and try cleaning the inlet. Hope you understand that you might require water inlet valve replacement ...

Question about WM1814CW Front Load Washer

2 Answers

...water inlet hose, the water inlet valve and the pressure/water level switch assembly. Inspect the inlet hose coming to the washer for any blockages. If the hose is not clogged then check the water ...

Question about WM1814CW Front Load Washer

1 Answer

...water line off cold inlet put on hot inlet tell machine to fill with hot water ok but will use cold cold water for rinse cycle , is this a control board problem Yes , It can be related to the control ...

Question about WM-1832C Front Load Washer

1 Answer

water inlet error It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must ...

Question about WM1814CW Front Load Washer

1 Answer

...water solenoid Water solenoid is leaking cold water Washer Not Filling Properly Water Inlet Valve Testing Washing Machine... Washer Water Inlet Valve Replacement LG Kenmore Front Load Washer

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...