Questions & Answers for: init eeprom

...INIT...what should i do...? Did you change the CIS scanner (because of broken glass or stained with ink?) The eeprom parameter is not machting with the scanner type! You cant fix this by yourself. ...

...The screen displays Init. EEPROM 5. Press and release the Color button again. 6. Press and release the On button to turn the printer off. 7. Press and release the On to turn the printer

...the buttons. The screen displays Init. EEPROM Press and release the Color button again. Press and release the On button to turn the printer off. Press and release the On button to turn the printer

...to "Other Settings", then go to "EEPROM Init", then press enter, select YES and press enter. This will reset the TV to the factory defaults. If that does not work, send it back for repair. Good

...printer, turned it on and off. no luck. solutions? Press all these buttons: Power+Load/Eject+Stop+B&W+Color When printer turns ON, "Init eeprom" appears Release and Press the Color

...on the remote, then key in 2580). Scroll down to "Other Settings", then go to "EEPROM Init", then press enter, select YES and press enter. This will reset the TV to the factory defaults. Good

...to flash and the red exclamation mark starts to flash. Now release 2.) 6.) the LED should say: "Init EEprom" 7.) now press and hold the power button until the printer powers off and powers on

INIT. EEPROM. When i push the colour button once, the screen then shows "push power sw". ?????? Not sure what to do here. Help please! In anticipation, many thanks. My guess is that the CYAN

...eeprom  moreover the firmware in the printer will show strange statslike some posters report when changing fusesim sure there will be a max change transfer and max change fuser and pcuvalues set ...

Unable to Init. A7 The scanner type mounted doesn't match the eeprom data. Refer to qualified technician at Brother service centre for checking