Question about Sport 1000 Folding Treadmill PFTL91205 - !
...incline. It is stuck at about mid incline. When I turn on the treadmill, it raises and lowers back to mid incline right away. Despite pressing incline buttons, there is no reaction. I have tried ...
stuck in max incline how do while using our Epic treadmill t60 it got stuck in max incline. I feel like it is the position sensor is not woking but not sure, how do i repair? Usually when stuck at the
Question about Epic T60 Treadmill
...stuck in the incline position. Other than that, it works great! How can I get it down? The screen reads that it's at 0% incline. My Tunturi j800 is stuck in the incline position. Other than that, ...
stuck on max incline and require the incline calibration code. hi, i also have problem with my horizon htm 3000, incline motor stuck. did anyone know where to buy brand new incline motor? and how much
Question about Epic T60 Treadmill
stuck in the incline position. Now the only thing that happens when I turn it on is a flashing light on the console and a little noise. The track is stuck on the highest incline. Please help! call the
...stuck down. The incline sensor has failed. It is a reed switch snapped into the side of the incline motor, 2 black wires that plug into the controller.. You can buy the sensor separately from the ...
Question about Balance 1500 Treadmill
1500 is stuck at the highest incline postion While using one of the incline programs the unit went maximum incline on its own and is stuck there Contact manufacturer, sounds like a defect with machine
Question about Balance 1500 Treadmill
...stuck on maximum incline and will not lower? My true 400p is stuck on maximum incline and will not lower i tried unplugging from wall to reboot but nothing. i then hit the reset button but still ...
stuck at an incline My reebok jet 200 tripped a fuse which burnt out the motor for the belt. At the time it was at an incline and after replacing the belt motor the incline didn't go down. The incline
Question about Balance 1500 Treadmill
...incline to get stuck. Check the incline motor: If the incline motor is not functioning properly, it could be preventing the incline from moving. You may need to have the motor inspected or replaced. ...
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions