Questions & Answers for: Kodak EasyShare image sensor

...image sensor device, CCD Chip, manufactured from October 2002 through March 2004 may exhibit the following condition: When the Digital Still Camera is used in camera mode, the LCD panel and/or ...

...it August 2006. Thanks Sounds like the image sensor is malfunctioning (common symptoms: distorted images with purple or green cast, completely dark images, flickering lines across the

...digital image sensor is bad. It sits on the back of the lense and will show lines before it goes black. You have to have it repaired. There are some repair services on e-bay that are cheap and ...

...Any ideas? The sensor chip on which focused light falls has a failed connection. The image is 'read' via a matrix that is scanned to retrieve the image and one of the paths of this matrix is

shows on screen.... review button allows me to review pics... but the screen only shows black and takes black pictures now? your image sensor is bad it will have to be replaced by a camera technician

How do you remove the infrared filter from a kodak easyshare c330 IR filters are integrated to the image sensor, and you cannot remove it.

Lately every picture taken looks green....?! Hi, This is a common problem. Check the previous images saved. If even the saved images/video's looked green, this confirms defective LCD screen. If saved ...

image sensor allows. They usually dont have DPI adjustment. However you can adjust capture resolution from 5 Mega Pixel to 1.1 Mega Pixel. Please refer to Page 24 and 25 on the following Owners Manual

at the battery door CRV3 (lithium) is at the top of the list it's the no. 1 recommended battery for Kodak cameras with ccd image sensor performance of the cam with alkaline. Thanks for using Fixya

...sensor ??? I forgot the camera in the sun for 10 minutes.In the first two or three photos the camera he works ok.After this the image on the screen is blurry. Camera not focusing correctly. You have ...