Questions & Answers for: ih m float setting

Ad

Question about Estudio 200L Copier

2 Answers

...(3) Check if the harnesses of the main and edge thermistors are open circuited. 2. Check the IH board and IH coil (1) Check if the IH coil is broken. (2) Check if the connector of the IH coil ...

Ad

...Check if the harnesses of the main and edge thermistors are open circuited.2. Check the IH board and IH coil(1) Check if the IH coil is broken.(2) Check if the connector of the IH coil is ...

Ad

Question about IH Tractor 706, 756, 806, 856, 1206, ITIH32

1 Answer

...IH gas. it hasent ran in many years. i draned all the old gas and rinsed the tank. and gas lines. new plugs points distributer, roter, plug wires. still nothing. i have spark. gave it a shot of ether ...

Question about e-STUDIO 352 Black and White Copier

2 Answers

setting to 0 and enter it switch off the machine and wait 30 seconds then switch on the machine you should be up and running if not change the thermistors and thermo fuse If 1st time occur, u can just

Question about e-studio 455 Copier

2 Answers

...(3) Check if the harnesses of the main and edge thermistors are open circuited. 2. Check the IH board and IH coil (1) Check if the IH coil is broken. (2) Check if the connector of the IH coil ...

Question about COPIERS E-STUDIO 520 Copier

1 Answer

error c472 my machine is error c472 [C471/472/473/474/475] indicates IH power voltage abnormality or IH initial abnormalityClear the status counter (08-400) to "0". If still occur again, u need to ...

Question about IH Tractor 560 Carburetor Kit BK16V

1 Answer

put carburetorkit in560 Farmall now it won't start I would tell you to make sure the Float is open the let the gas in and stops when filled, If that don't work I don't have any other ideas then have ...

Question about Case Corporation Tractors International Harvestor

1 Answer

IH 300 point gap Need point gap setting for IH 300 utility tractor. Well I asked around and found about 0.020 or in better terms of understanding is about 20 thousand's of a inch.

Question about Aficio SP C820DN Laser Printer

0 Answer

...the error. If still there the error check the following; Check CN983, it may be disconnected on the IH inverter. Defective IH inverter - replace IH inverter. Defective IH coil unit - replace IH coil ...

Question about DSm645 Digital Imaging System

1 Answer

...actuator for the fusing belt sensor * Defective fusing belt sensor * Broken connection between IH inverter and IOB * Incorrectly set fusing unit 1. Check if the fusing unit is correctly set. 2. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...