Questions & Answers for: Honda Accord ignition switch wiring

...ignition switch will not cut the car off my 1997 honda accord ingnition will not turn with my key in makes dinging sound but will not let me start the car. Can somebody tell me what's wrong? one of ...

...ignition switch. today while working on the car that wire sparked and now my car, radio, and dashlights will all not turn on. when i turn the key in the ignition I get no response. my guess would be ...

...ignition switch as described under STARTING AND CHARGING SYSTEMS/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/IGNITION SWITCH. Remove key light case from lock body, if equipped. On 1989 Accord models, ...

ignition switch fuse i ran a bypass on the neutral start switch and changed the battery i think it may be a short in the ignition switch i can turn my switch on and the lights come on but on the start

...ignition switch After replacing the ignition switch i no longer have power to the ignition. I have power to the interior lights even the head lights. NO DASH LIGHTS... just nothing when i turn over ...

...ignition switch, at the back of the ignition switch using a jumper wire touch the white wire to the white with black together, if the starter cranks it is probibly the contacts on the switch, or if ...

...ignition switch starter connection straight to the starter motor solonoid youll need a wiring diagram form chiltons online or another repair manual It may be testy for an amatuer cause modern wiring ...

...ignition switch and the igniter.


Fig. Fig. 8: Terminal identification on engines without VTEC
Check for voltage between the green wire ("BLU 2" on VTEC) and ground. Battery voltage ...

IGNITION SWITCH STARTER RELAY SEEMS FINE CLUTCH SWITCH SEEMS FINE MAIN RELAY IS FINE 1990 HONDA ACCORD WON'T TURN OVER TO START BUT IT WILL ROLL START. I HAVE CHANGED THE ALTERNATOR AND TESTED

...ignition switch. Remove the upper and lower column covers and find Ignition wiring harness. Find a wiring diagram and check for 12 volts from switch to engine after turning to the runs position, or ...