Questions & Answers for: Oldsmobile ignition switch wiring

...ignition switch wiring on 2000 olds intrigue. I have under dash removed. Disconnect Car Battery I replaced the ignition switch in my wifes 2000 intrigue. (ignition mounted in front dash). I had to ...

...ignition switch or what. It's not the ignition switch. Someone has been playing with the wiring. What was done to your car? Did someone wire up something to work that didn't or did someone install ...

ignition switch. When I check the two wires that connect to the starter. My hot wire has 12.6 volts when the key is turned. The resistance on the other wire is OL or out of limit of multimeter. How do

...ignition switch, and use toggles. The ignition switch is trash, it spins, but does not start the car, and my battery went dead. I cannot use the car now, and have no way of moving it, and don't have ...

can not get car to crank by switch but can only turn over by putting wires together under hood what do you think i should try? check ignition switch put 12 volts to the ignition feed wire at the ...

...ignition switch or in the wiring leading to your ignition switch. I would recommend that you check all of your wiring leading to and from your ignition switch. Look for wires that have been worn ...

...Ignition switch. The switch is wore out. $600.00 to replace! NOT!!!!! The ignition is not sensing the ignition key resistor. To fix this , you will need to sacrifice a key but it is a simple fix to ...

...ignition switch. nope changed it nothing. the problem is that i cant isolate why the yellow wire has no voltage. The yellow wire is the start wire out of the ignition switch, and it should have ...

other ignition and it should work. The ignition switches are made to be replaced. You should not have to cut or splice anything, those parts would stay in the vehicle and attach to the ignition switch

...ignition switch is in the START or RUN position: • The GAUGES fuse 4 • CKT 39 (PNK) When you first turn the ignition switch to the START or RUN position, a class 2 signal from the BCM is sent to the ...