...let the key turn. Any Ideas? It could be your ignition switch is worn out do you have alot of keys or key rings hanging from your ignition. I have changed many due to this the weight wears them
...ignition key lock Problem : Jeep liberty 2002..... Ignition Key will not turn, Possible solution: Ignition lock replacement. Question: Are there any recalls regarding this anywhere? ( i haven't seen ...
...turning the steering wheel (will be very hard to do) as you put the key in the ignition and try to turn the key on, if that doesn't work, try turning the wheel the other way while turning on the
key from ignition and open driver's side door, the key alert keep sounding and will not stop until the door is closed. On reopening door, alert begins sounding again, without the key placed in
Question about 2002 Liberty
...key or ignition switch is worn down and allows removal but with the security imbedded in the ignition systems the key may not work anymore or the ignition switch wont turn or recognize the key either ...
Question about 2002 Liberty
...ignition key will not start the vehicle. I have to use the remote starter then insert the key into the ignition to keep the vehicle running. When I turn the ignition off there is alow buzzing noise. ...
key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. 3. Insert the second valid key
key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. 3. Insert the second valid key
Question about 2005 Liberty
key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. 3. Insert the second valid key
Question about 2005 Liberty
...ignition key must be in the key cylinder for cylinder installation. The key cylinder must be aligned with the ignition switch for installation. (1) Before installing ignition switch (1), rotate ...
Usually answered in minutes!
1,658 Questions
839 Questions
768 Questions
735 Questions
633 Questions