...ignition key should NOT be in the ignition, and ignition should be OFF. Press and hold UNLOCK on your driver's door lock switch, insert and remove your ignition key TWICE, and insert the key in the ...
...key in ignition and turn to ON (As far as you can without cranking engine) 3. Turn ignition OFF and remove the key from the ignition. 4. Press and hold the driver side door lock switch in the UNLOCK ...
Question about 1991 LeSabre
...ignition switch key will not turn to off posit 1991 buick Lesabre,ignition switch key will not turn to the off position Spray the beejesuz out of the inside of the tumbler/keyhole with WD40...replace ...
...key in ignition and turn to ON (As far as you can without cranking engine) 3. Turn ignition OFF and remove the key from the ignition. 4. Press and hold the driver side door lock switch in the UNLOCK ...
...ignition key from the ignition lock cylinder. Close all of the vehicle's doors. Press and HOLD the door "LOCK" switch to the "Unlock" position. Insert and remove the ignition key twice (without ...
ignition key cylinder in a Buick unlocks the ignition and allows the Buick's engine to start. The cylinder contains a switch on the end of it (inside the cylinder) that sends an electric signal to the
...key in ignition tried to start car this morning, put key in ignition, key wont go in, steering is not locked nut there is a gold metal sticking out half way in the ignition, preventing key from ...
Question about 1994 LeSabre
...key made; ignition is not turning. 1994 Buick Lesabre ~ I changed out the ignition cylinder and took the template key to the dealership to have a new key made. When we got home with the new key, the ...
Question about 1999 Century
...Key IIĀ® ignition key (1) contains a unique resistor pellet which is idenified by the Body Control Module (BCM) (2). There are 15 different key (resistor) codes. Only one ignition key resistor pellet ...
key from ignition and then insert key into ignition without turning ignition cylinder and remove key. 5. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition. 6. Release
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
1,091 Questions
904 Questions