Questions & Answers for: Yamaha idling

Fast Idle I Have a Yamaha 750 special and I need to slow the idle down. It idles at a little over 2000rpm's I need to get it down to approx. 1000rpm's. My problem is that I don't know which screws to ...

i can not get my yamaha blaster to idle have i can not get my yamaha blaster to idle have stripped carb and cleaned but it still wont ildle Make sure you have no vacuum leaks and the idle screw is ...

...it. Aside from that, there are two other things that can cause your engine to die when it should be idling: the idle speed mixture adjustment, or low cylinder compression. Of course, if it was idling ...

...explanitory start turning it if it idles up then your turning it up if it idles down then you are idling down usually in is

and then keep turning it clockwise till its revving high, Then slowly do it anti clockwise till its idling at a low RPM which you feel right or/and defined in the owners manual

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...

my 1981 maxim 650 idles high. what is the correct idle setting and how do i adjust my idle seems right when the bikes cold but as it warms up the idle rpm climbs and the bike backfires Hi, Robertshenk

2006 v star 1100 classic w/ vance + hines slip on exhaust. I get popping at idle and decel (i'm thinking it just needs to be rejetted). The big problem, is when the bike has already warmed up (at ...

06 v-star 1100 when twisting throttle and then back to idle position it takes a while to idle back down or stays at high rpm when cold will not idle at all till warmed up a bit then wont idle down or ...

once bike gets over 3000 it sticks there. (hanging idle) its not any obvious reasons like a stuck throttle cable or dirty pod filters. could it be a sticky auto advancing unit? or could it be a vacuum