Questions & Answers for: idler pulley thread

...the water pump in my '94 OLds 88 how do we change the idler pulley while we are at it? just un-screw the retainer bolt for the idler pulley. some of them are left hand thread and or require a #50 ...

Ad

Question about 1997 Grand Prix

1 Answer

...idler pulley to access one bolt on the water pump. I did remove the power steering pump, but I still need to remove the idler to get the last bolt. It may be a star or torq drive, but I haven't been ...

Ad

Question about Atlantis MDE7400AY Electric Dryer

1 Answer

...several ways but still have slack. Start from the motor threaded shaft. Then pull out the Idler pulley so that the back of the belt will lying on the Idler pulley in upright position. that is

Question about 2006 Mustang

1 Answer

...idler pulley 2006 Ford Mustang V6 There is a noise under the hood and the dealership said it was the idler pulley. How do you change it, and is it something a gear head with basic know how can do? ...

Question about LER4634J Electric Dryer

1 Answer

...idler pulley assembly locks into two slots in front of the motor. The belt will loop through the idler pulley and the on the motor. Push the belt under the idler wheel and thread it between the wheel ...

Question about 1997 K1500

1 Answer

Idler Pulley Removal Is it pretty easy to remove the idler pulley? Do you just remove the bolt or what? Also, are the threads just regular threads or are they reverse threads? Any help would be ...

...is at the idler pulley. loosen off the nut holding on the pulley and behind the pulley ther should be a long threaded bolt that moves the pulley up or down. When finished retension the idler pulley ...

Question about 2006 Ram 2500

1 Answer

...idler pulley dodge ram I removed the damaged idler pulley and purchased a new part. I can't get the bolt to line up and thread in the hole with the pulley on it. It's a really tight ...

...belt idler tensioner pulley on 86 Delta 88 3.8 L engine come off with counter clockwise or does it have a left handed thread design. The pulley wheel broke and I want to take it off! Standard

idler pulley please? 2008 5.7 hemi $4.87. No one give the size. It is the size of the socket that fits it. Bolts are measured by thread section diameter not head diameter. You don't say which? 13/14mm

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...