...idle screw on the carburetor, to do this you will need to run the ATV, rev it and tweak the idle and throttle screws accordingly. Between revs you will need to adjust the idle screw and the throttle ...
...idle on 2013 polaris sportsman 500 ho follow ur throttle cable down to cars there should be a plastic screw close to cable to adjust idea but with polaris that screw can be hard to find with all the ...
...idle screw on carb Engine is idling to low won't stay running The adjustment for the idle would be on the side of the carb. sometimes just as a phillips screw and sometimes as a knob that is on a ...
Question about Quads 125cc Full Size Adult 4 Wheelers ATV
...too tight (will cause high and varying idle. .. .not wanting to idle smoothly), the throttle cable could be too short or routed wrong or pinched...?? or the idle screw is in too far. more info
...setting on the finger screw Finger screw, (Idle Screw).. if the carb is CLEAN, new spark plug, valves properly adjusted, etc.. its only function is idle speed and it is what you are comfortable
...idle screw no help Have a 2007 artic cat atv 400 4by 4 automatic, Has continuous high idle and idle screw doesn't help. These atvs wont shift properly at high idle and so this is a problem. Is this ...
Question about 2006 Magnum 330 4X4
idle, turn the air screw in and out SLOWLY about a 1/4 turn at a time..EACH TIME ..waiting until the idle settles and then until you reach the point the machine idles as high as possible, then turn in
Question about 2006 Magnum 330 4X4
...the idle screw, etc. Ideas? Adjust idle and mixture screws to default positions - start it and then make the necessary adjustments. Idle speed, low and high speed mixture settings if
...Idle. Throttle stop screw. On the left side of the vehicle, looking in at the carburetor, notice a screw pointing straight down near the bottom of the carb, slightly forward. Turn the throttle stop ...
Question about Polaris ATV
idle there should be a screw on side of carb up above the over flo screw (which is on the bottom of the bowl)it will be right above the bowl start it up and turn the screw one way will make it idle up
Usually answered in minutes!
2,486 Questions
168 Questions
72 Questions
99 Questions
61 Questions