Questions & Answers for: ide hard drive

Ide Cable and then the power and turn you system on IF ITS SATA connect the sata cable to both hard drive and main board connect the power cable and your done!! NB:: sata ports are labeled SATA 1 SATA

...IDE hard drives are compatible, all that's needed is the laptop to hard drive adapter. They come in various flavors.... ide to sata (with power converter), ide to usb, ide to ide (44 pin female to 40 ...

IDE controller. If the hard drive is connected on the first IDE controller as the second drive then it is jumpered as the SLAVE. If the hard drive is connected to the second IDE controller then it can

local computer dealer if there is available. Buy an external USB to IDE Hard disk enclosure. Of course, these are things to buy, but check first the CMOS setup if the Primary IDE is enabled on your PC

...slave　 :::': note the plastic jumper is ' located at the rear of the hard drive next to the IDE/SATA lead/s hope this helps

IDE/PATA hard drives and the maximum size you can install in a desktop depends upon the computer's BIOS. SATA hard drives are generally used in later model computers and the size of the hard drive

...hard drive was originally an IDE 250GB drive. These drives are obsolete and hard to find. I suggest using the following Generic IDE to SATA device on Amazon for about 7 dollars and then replacing the ...

...IDE 3.5 2.5 Hard Drive with an Adapter Cable http://www.youtube.com/watch?v=iE8t5IGr0e4 ...

...IDE 3.5 2.5 Hard Drive with an Adapter Cable http://www.youtube.com/watch?v=iE8t5IGr0e4 ...

...ide a hard drive You should check what kind of hard drive is using your computer. If it has less then 5 years probably hard drives are sata. watch this tutorial Instructions on USB To SATA IDE ...