Questions & Answers for: ide connector

IDE Connector Does anybody know anything about this connector? I am looking for IDE cable and/or adapter. On Sep 17, 2007 PcExpert answered a question about this connector here and posted a picture of

...IDE (large connector) and SATA (small connector) IDE of an ide cable has 3 jacks 1 for the main board and 2 for IDE drives 2 drive must be set to master and the other to slave Set the drives by using ...

...IDE connector socket on the hard drive. If it doesn't have a notch on the connector on the IDE cable then the connector needs to be plugged into the hard drive with the red stripe on the cable ...

Install IDE devices (drives / DVD / CDROM) sata IDE devices have different "data" and "power" connectors than SATA drives. So, you need a motherboard with IDE connectors, if you wish to connect an IDE

IDE Connector? Two rows of pins. Next over are the Jumper pins in the Jumper Block. Finally, next to the Jumper Block is the 4-pin power connection. To make sure the IDE flat ribbon cable, is inserted

...IDE cable connector;There is a faint red stripe on one side of the cable. This is Always on the same side as number 1 wire, in the cable.On the above link scroll the page down towards the middle, and ...

...IDE 40-pin connector )NOTE*The IDE connector on the motherboard should be keyed. Should have a cutout on one side. This is so the Number 1 pin in the flat IDE ribbon cable, will line up with Number 1 ...

...ide connector i have problem with my harddisk ide connector for my laptop. it says non system hard disk or disk error.can i replace or get some of the ide connector to that holds the drive to the ...

...IDE 1 connector is Black in color, and IDE 2 is Blue in color. The IDE (PATA) harddrive's data cable goes to IDE 1. Optical drive/s (CD/DVD drive) goes to IDE 2. This is the type of power cable from ...

...IDE connector is added to RAID Hard Drives or Industrial grade desktop computer drivers.. it's a backwards compatibility measure in case of failure. Other driver may also include an IDE power source ...