Questions & Answers for: ice o matic

i have a ice o matic that is old but still runs and freezs fine but will not harvest ?mabey relay yes, relay or motor.

...ice-o-matic model #IFQ-1 only a couple years old. It makes a quantity of ice but then freezes over too thick, water stops running and the ice cubes won't drop out. Any suggestions? Have you cleaned ...

Ice machine not coming out of the harvest mode. 1406 model ice o matic look at harvest thermostat

no ice in my ice o-matic model ice220ha1 no water entering ice forming tray no/low gas charge hot gas valve stuck open no sprayer pump working or paddle wheel drive motor not working

i've adjusted my Ice-o-Matic ICEU300FA1 from 16 sec. to 4 sec. the bridge seems to be better but still thick. We have to break it up to bag it. thanks Dan short freeze time. no ice

wiring diagram for the emf800 as ice-o-matic http://www.iceomatic.com/uploadedFiles/Shared_Content/Product_Content/Downloads/Service_Manuals/EF-EMF%20Series%20Tech%201%2009.pdf

no water going into o matic ice maker check the water float that is how the unit deterines when the reservoir has enough water it could be stuck

does not go into harvest ice on evaporator plate is thick and does not go into harvest There are two relays in the control box. One or both are brbably burned and will need to be replaced. replace Ice

...ice o-matic ice machine its makes ice and dumps it but don;t go back in freeezes finding what may be my problem is with ice o-matic ice machine its makes ice and dumps it but won't go back to freeze ...

Ice-o-matic ice dispenser cd40030 how do I adjust the bridge How to adjust the thickness of ice https://www.manualslib.com/manual/924112/Ice-O-Matic-Hisu055.html?page=10