Questions & Answers for: ic tech

...convergence IC's & check fuse devices.... Normally done by a skilled Sony tech..... If you need step-by-step instructions, try to find a local tech who will work with you....please

...tech replaced convergence IC's after the convergence went completely wacko....Convergence is perfect now, but the image quality is dull and grainy rather than the crisp, lush picture we had before. ...

...smaller heat sink and the markings on the IC as "TAxxx",TDAxxx",or "STRxxx". it usualy has 8 to 10 pins. if you are not a tech do not attempt this repair without help from a tech or have a tech do

...IC # for Location 902 Hi, i am a tech and i have this HTS system to be repaired..the top of the IC in the power stage is blown off clean. IC location is 902...what i would like help with is to ...

send me info on how to fix convergence myself Your lifesaver...dr go to this link they have your ics and they send the instructions with the ICs and will send an email that will sign you up for free ...

...ic when experiencing this problem and refer a webpage to purchase the parts from. Do you think this will solve the blury image and is it something that I could do myself or should I simply take it to ...

STK392-110 ICs I have a jvc av-65wp74 and my red is swags down and is not a lined with the other two colors do you think i need two STK392-110 ICs or is it something else... i am good with fixing ...

...IC's replaced for a tech to come out and do that cost about $350-$400 electech this is the conversion IC's that are doing this and it is common for all projection tv's to have to get these IC's ...

IC 1001) are present on the board being repaired. Take this info to a TV tech and they will find the correct EEPROM to replace. Your TV will come back to life. If not, give me the numbers of ICs IC001

Ic goes bad it has to be replaced.but since you have a flat screen those kind of tv carry a module for every section in the tv so the whole colour module on your tv has to be replaced.if you are not a