3110 display ic jumper 3110 blank display display ic probiem 3110c 3110 display ic jumper 3110 display i.c jumper Nokia 3110c Memory card not working plzzz give me jumper setting thanks 25787 ghoob ...
3110 diaplay ic jumper Here is your jumper solu.. 6300 and 3110 are same. Change IC or follow the picture for jumper
...cleaned it . but memmory card not reading.i heat the board well., and changed the memmory ic, but cannot make.other all functions ok,only memmory not reading...customer used the phone two ...
...mobile that mobile working fine with that memory card.. Please advise me.. The problem are in MMC IC that not in good condition.to fix the problem only with change this IC.If you do not the expert
...may be Chips also can affect the keypad and allows the phone keypad not to function. There is an IC chip inside that controls the function of the keypad. You can fixed the IC chip inside the phone ...
my nokia 3110 classic is dead , how will on PHONE IS DEAD WON'T COME ON If the mobile phone does not switch on, it is called a dead mobile. It can be due to many reasons 1. Water damage 2. Fall ...
...a) Voltage coming or not (b) shorting Note : If there is shorting then clean the circuit in ultrasonic cleaner (Remove display, camera, etc before putting it in ultrasonic cleaner ) Clean the circuit ...
...a) Voltage coming or not (b) shorting Note : If there is shorting then clean the circuit in ultrasonic cleaner (Remove display, camera, etc before putting it in ultrasonic cleaner ) Clean the circuit ...
nokia 3110 fall in to watter and dead enter watter and dead which parts are damaged 1..remove this coil mark in (1)...if u want to check is pf is short,..... 2..remove this coil mark in (2)..if u want
is IC display and LCD seperated? my 3110c display suddenly went blackout but the phone function still ok..only problem is the display..i search on the net what really the problem..and it was on the ic
Usually answered in minutes!
5,420 Questions
5,130 Questions
4,425 Questions
4,285 Questions
3,818 Questions