Questions & Answers for: hyundai matrix engine

hyundai matrix 2002 year, both front side lights and both number plate lights are not working ? i have checked all fuses in both boxs and the fuses are all fine , Any ideas i have a hyundai matrix ...

Ad

...don't know where to locate it in the car did you check the front passenger door. the no. on my Hyundai Matrix is located inside the f ron passenger door right on the top right corner. its worth a ...

Ad

Question about 2008 Sonata

1 Answer

...hyundai matrix automatic gearbox and how much thank you. if you stay in cold weather, use 5w-30 for engine oil, if warm weather 10w-40 oil THOSE FOR ENGINE.. FOR automatic gearbox use type MERCON V ...

...Hyundai Matrix car is turning on and I don't see what the problem is The check engine light keeps on coming on and I don't see the problem on hyundai matrix most common fault coming on is ...

Question about 2005 Matrix 1.6

2 Answers

MATRIX CAM TO CAM TIMING DIAGRAM Is this the diagram of this engine or do you have the single ohc?Single OHC engine Where do the glow plugs go on a 1.5 ?

...Hyundai Matrix car is not starting. When I turn the key to start the car it tumbles but won't turn on. I know that it is not the battery because we took the same battery and installed it into My ...

...Hyundai Matrix 1.6 Hi, Acording to autodata the following applies. hyundia matrix 1.6 01-09 engine g4ed stage 1 +30nm stage 2 +90 degrees stage 3 slacken 360 degrees stage 4 +30nm stage 5 +90 degrees ...

...Hyundai Matrix 1.6 ENGIN RUNNING FAST 2005 Hyundai Matrix 1.6 JUST PUT NEW ENGIN IN HER AND NOW START IT UP D IT RUNNING FARE TO HIGH CA YOUHELP ME check that all vacuum lines have been connected. ...

hyundai matrix 1.6 the oil pump fails will it cause overheating problem and make the engine stops while it is running that doesn't sound like a oil pump. if the car is overheating and the engine shuts

Hyundai matrix cranking but not starting? when I try to start it, the engine cranks but it doesn't start. run the fault codes check for faulty cam/ crank position sensor/s check for broken timing belt

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...