...instrument panel center bezel to get to the mounting screws in the radio. i also had to remove the center panel,be careful with the heater controls,i didn't fully disconnect the hot/cold selector and ...
Question about Motor 2003 XG350
...Elantra BE-73 - BE-74 2004 MY Santa Fe BE-43 - BE-44 2004 MY Sonata BE-40 - BE-41 2004 MY XG350 BE-46 - BE-47 KEYLESS ADAPTER CABLE INSTRUCTIONS: Connect the keyless adapter cable to the Hi-Scan Pro ...
...Hyundai Elantra Instrument panel light burned out The instrument panel with the heater and a/c control switches has a burned out bulb. Does anyone know how to get to it to replace it? Thanks so much. ...
...Hyundai Elantra? It doesn't work and I want to see if it can be fixed or replaced. you will need to replace the clock.the clock has (2) 12 volt power supplies fuse 25 and fuse 9 in the pass. ...
...instrument panel bezel to gain access to the radio. There are two screws above the instruments that need to be removed and another behind the ashtray. Once those screws are removed, you can simply ...
...instrument panel in ( two above the steering wheel area, and two are hidden in the ash tray, so you have to remove it). 2.Then you GENTLY pry the whole panel loose, because it is held in place by ...
hyundai elantra Removal & Installation Before servicing the vehicle, refer to the Precautions Section. Disconnect the negative battery cable and wait 90 seconds for the SRS memory battery to drain
hyundai elantra odometer light bulb replacement It's a surface mount LED. Pull the Instrument panel. Find the on you want to replace. I use a razor to cut the solder and remove the LED. Use a fine tip
Question about 2006 Elantra
Hyundai Elantra radio or... Sorry I don't have experience of your model but as a general rule the dashboard is originally fitted as an assembly complete with steering column. There are generally a few
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions