Questions & Answers for: hyundai accent window crank removal

...accent how to remove the window handle I am trying to take off the drivers door panel and have everything removed except for the window crank. I can't see any clip holding it on. push and move it to ...

...hyundai accent Need to remove drivers and passenger front window crank in order to remove door panel and replace front speakers...can't see any clips or screws...what to do? Your Local Auto Parts ...

hyundai accent? there are no pins or clips or screws visible and i am unable to buy a tool for this. how do i get it off? push inner circle back on the back of the lever is a horseshoe clip ,these are

...Hyundai accent? put thin piece of cloth between window crank, twist it around, turn window crank up and down, then pull thin piece of cloth away from the round spinable crank ball (piece you hold) ...

...Hyundai accent Any advice for getting the inside door panels off and repairing the handles would be appreciated. I'm guessing there's a broken cable that will need to be replaced that links the ...

...hyundai accent can anyone help me? take a shop towel and pull it under the crank handle. then rotate rag to snag clip. it will fly off so keep an eye out for it. to reinstall put clip on handle then ...

Hyundai Accent 2001 door removal. need manual window crank removed. cant find c shaped thing everyone talks about that is supposed to pop off The accent uses a roll pin, not a c clip. you have to ...

...remove the window crank handle from a 2002 hyundai accent I have the door panel ready to come off I have a 2004 accent and I was able to get the window crank off using the method shown in this

...window crank 2003 accent There should be a retaining clip just behind the crank where it attaches to the rod that goes through the door panel. This will need to be removed. There may also be a screw ...

window crank pry back the panel so you can see behind crank use a flat head screwdriver and a towel so you don't scratch it. inside the crank is a small U shaped clip get some small needle nose plyers