Questions & Answers for: hyundai accent misfire cylinders

Question about 2000 Accent

1 Answer

...hyundai acc i did a full tune up on my car (2000 accent 1.5) im getting codes p0300 random misfire.....p0301misfire cylinder 1..... p0302 misfire cylinder 2 since i already change sparkplugs,wires, ...

Ad

...1 misfired in my hyundai accent Most likely just a bad spark plug or ingnition wire, change spark plugs with original equipment plugs. That is the most common problem could also be faulty

Ad

...hyundai accent code 302 misfire and slow responce o2 senser car has intermtant misfire and slow start o2 senser code check engine light starts flashing when has misfire Yep!.. Typical with an engine ...

...fix P03000 misfire in 3rd an 4th cylinder 2001 hyundai accent gl change the coil for the third and forth cylinder and that should fix you right up. Check the spark plugs and change the spark ...

Question about 2000 Accent

1 Answer

...Hyundai accent 1.5. I have a low end miss in the #4 cylinder. I know this because my check engine light blinks at idle but stays on solid when moving. What could be causing this? If you already know ...

Question about 2002 Accent

1 Answer

My Accent 2000 is misfiring on cylinder 3 ? Check plug lead for excessive resistance Check sparking plug Check for tracking in the ignition circuit Check compresion on that cylinder If petrol ...

I have a hyundia accent 2003 my coil pack keeps going out and misfires on all 4 cylinder and also has several random misfires. I have replaced coil several times and it goes bad very quickly, what ...

...Hyundai Accent & it would cost $164.88 with tax. Is this a good deal or is it I just got off the phone with my mechanic who I mostly trust & he said my 3rd cylinder is misfiring, in my ...

Hyundai Accent p0300 random multiple misfire I have a 1998 Hyundai Accent, Its giving me a P0300,p0301,p0302,p0303, and p0304. Random multiple misfires. Ive changed the plugs and wires, and don't want

...hyundai accent gsl ? my check engine light flickers and then stays on after a few blocks it acts like it wants to stall i put it on the pocket scanner and it reads P0300- P0301 and P0302 cylinder ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...