Questions & Answers for: Jeep Grand Cherokee hydraulic oil

Question about 2001 Grand Cherokee

1 Answer

the pump to the Fan was replaced. Now the power steering and fan does not work. Inferior hydraulic oil was used by the mechanic. So I drained the oil and replaced it with the right oil. Problem solved

Ad

Question about 1997 Grand Cherokee

1 Answer

intercal time for change hydraulic oil for automatic transmision for jeep cherokee model 1997 Every 20,000 miles, also pull the dipstick. The color of good fluid is pink to a light red.

Ad

...hydraulic lifters, but unless you dont change your oil every 5k miles and/or use some cheap oil, there should be no problems. You should have a real mechanic look at it, and verify that you have good ...

...measured, sounds like u may have a defective oil pump and the low oil pressure is allowing the hydraulic valve lifter to collapse, don't continue to drive this, u will burn out the engine

hydraulic lifters that pump oil up the push rods. I'm assuming you have the gas engine V-6 or V-8. When you changed the valve cover gasket(s), did you do anything else under the valve covers? It seems

oil it only needs changing every 20.000 miles as this is what happens it builds up clag in the engine and gums up the hydraulic tappets along with everything else ,do it my way and the engine will run

Question about 1993 Grand Cherokee

2 Answers

...has an LSD differential it needs a special oil , if not it takes 80w-90 hydraulic oil. If the car has lsd diff . most of the cars hav a sticker with those initialls (LSD) just near the fill up

Question about 1993 Grand Cherokee

1 Answer

...hydraulic oil or auto matic transmission fluid don't fill it to the top its going to be time consuming but put some in and try it if it doesn't pump to the top than add more till it works to ...

Question about 1993 Grand Cherokee

1 Answer

...oil level is correct, may i know how to fix this problem There is no one fix works for all on these code. Also you have left out the letter and one number of the code I assume these are P0730 and ...

it will crank over. It may have gotten a hydraulic lock due to the overfill of oil. With the spark plugs out it should purge out the hydraulic lock on oil if that is the case. Or it may be the starter

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...