Questions & Answers for: Mazda Protege hydraulic hose

...It's a 1998 Mazda Protege. It's the front wheel breaks that stiffen up. This is the problem with hydraulic brakes line or the hydraulic brake system is causing this problem in car .... Good

how to adjust a hydraulic clutch mazda protege 01 2 0L? or how do i change it by my self if the adjustment does not work? With a hydraulic clutch there is no adjustment as the slave cylinder does that

...cold Check which oil you are using. This can happen with excessive dirt int he tappets if they are hydraulic or if the oil viscosity weight is too high. At one time, Rislone was the answer, but it

...gear then you may have a bad clutch master and or slave cylinder.Let me know if i can help. Most hydraulic systems are not adjustable, if your clutch is slipping it probably needs to be replaced. ...

does the mazda protege 2002 have any clutch adjust, have to push peddle all the way to the floor to shift? All hydraulic, probably slave cylinder going bad otherwise master cylinder

...hydraulic hose on lower driver side engine compartment had splashed hydraulic fluid had sprayed on motor.Napa doesn't call for a hose on their clutch parts can someone tell me what's up with ...

how to adjust clutch This year and model uses a Hydraulic clutch release system, all hydraulic clutches by design are self adjusting. If you have a hard pedal or a slip problem you need to replace the

Hello, my son has a 2003 prot?g?. The hydraulic fluid is leaking someplace checked all the brake lines , shifts just fine cannot find any leaks. Most cars also have a hydraulic clutch with ...

How and where do I put hydraulic fluid in my 1992 mazda protege Look for a little tank labeled "Brake Fluid" under the hood.

...hydraulic clutch can be easily checked in the fluid reservoir, and can occur if a hose splits .. Yes, it is your clutch. Not the transmission or anything else. When I say your clutch, it could be the ...