Questions & Answers for: TallyGenicom Matrix hpr logic board

Question about 2280 Matrix Printer

2 Answers

...logic board. The print head may have a fault. There may be a fault on the logic board or interconnect board The first thing that I would recommend doing would be to calibrate the print head operating ...

Ad

Question about 6312 Matrix Printer

2 Answers

...logic board. I would however try upgrading the firmware to the latest version, I think this is version 4.0 as I believe this may contain some fixes for Hammer Voltage errors. there are always coming ...

Ad

Question about 6306 Matrix Printer

6 Answers

...logic board has a bad print driver. One of the trans is open. Replace logic board. the other possibility is you could have a faulty hammer bank. If hammer cable is ok,check whether it is touhing any ...

Question about 6312 Matrix Printer

2 Answers

t6312 problem for lipi 6312 tally genicom line printer my printer shows an error (hammer voltage 1) The problem coming from your logic card hammer bank cable . Need to be replace logic card and hammer

Question about 6306 Matrix Printer

1 Answer

when printer initializing ,printer shows shuttle fault.I have allready clean shuttle sensor, but till face same problem (model lipi t6306 line printer) MAY BE LOGIC CARD PROBLEM.

Question about 6312 Matrix Printer

1 Answer

logic board for any damage, check the cable makes good contact. Further than this you may be able to test each of the coils with a multi meter to see if there is a fault with a coil, if there is it is

Question about 6312 Matrix Printer

1 Answer

Sir, We have a Genicom 6312 L Line Printer. This printer is attached with UNIX (5.9) system. It was working fine till few days back. Recently we changed the Logic Card. After this the printer is not ...

Question about 6306 Matrix Printer

1 Answer

tally 6306 horizontelly checksum error block 8 Sorry for the problem. The problem coming from the logic of the printer. Firm ware of the logic card is not working properly. Re-load the firmware & ...

Question about 2265+ Matrix Printer

1 Answer

most needed is the number ini the lower left) it is impossible to decode or decide what is wrong with your printer. more info is required. do not replace your logic board or your print cables. (rookie

Question about 2265+ Matrix Printer

1 Answer

...error is a "horizontal task" error. meaning that either your motor or your main logic board is bad. If you have another printer available, try swapping the logic board to see if the problem

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...