Questions & Answers for: Canon PIXMA hpr logic board

Question about PIXMA MP830 All-In-One InkJet Printer

2 Answers

...logic board. The print head is available, part number QY6-0061 but you will struggle to find a logic board. The only other thing you can try is resetting the EEPROM on the logic board, this sometimes ...

Ad

Question about Pixma MP450 All-In-One InkJet Printer

2 Answers

...logic board, Canon suggests you replace the main logic pcb. Hi there, The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. ...

Ad

Question about PIXMA MP150 All-In-One InkJet Printer

1 Answer

...error e2 and e16 pls solve it.tq Carriage unit (main unit) Timing **** strip film Logic board ***'y Carriage motor (main unit)& Internal temperature rise error [5400] - Logic board ***'y ...

Question about PIXMA MP510 All-In-One InkJet Printer

1 Answer

...Logic board (QM2-3827) - Carriage motor (QM2-3872) 3 times Line feed error [6000] An error occurred in the LF encoder signal. - Timing sensor unit (QM2-3878) - Timing **** disk film (QC1-9597) - Feed ...

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

...logic board assembly is failed or an internal error of one of the ASIC chips on the logic board and can only be repaired by replacing the logic board at the Canon Service Center. Please rate your ...

Question about PIXMA MP980 All-In-One InkJet Printer

1 Answer

...logic board error code (= 'other hardware error'). Before committing to replacing a logic board, ensure that the error has not been generated and held by spurious external signals. Reseat the ink ...

Question about PIXMA iP3000 InkJet Photo Printer

1 Answer

...Logic board ***'y (QM2-1520) Before replacement of the logic board ***'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also ...

Question about Pixma MP500 All-In-One InkJet Printer

1 Answer

...Logic board ***'y (QM2-3078), Carriage lift sensor unit (QM2-3092). In brakets you have the part number for each one of them. Before replacement of the logic board ***'y, check the waste ink amount ...

Question about PIXMA MP530 All-In-One InkJet Printer

1 Answer

...logic board assy and purge unit to fix it. Before replacement of the logic board assy, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or ...

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

...error. In most case the logic board assembly is failed or an internal error of one of the ASIC chips on the logic board and can be repaired by replacing the logic board at the Canon Service

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...