Questions & Answers for: hpr logic board Cooktops

jenn air electric cooktop I think my cooktop shorted out last night. There was a popping sound and a bright red flash came out from under the burner. I reset the fuse box and the same thing happened. ...

a repair man here and he said the main powder logic board ( WB23T10014) was the problem, it would cost $757 to fix. I ordered the board for $230 and installed it myself but still have the F113 problem

...Logic Board found on the right side of the unit (under the where the keypad rests). Trace the cable to the Logic Board and disconnect the cable from the board. It is probably easiest to remove the ...

...cooktop. (3) If fault persists, replace power board (4) If fault persist, replace logic (main) board Search for my solution for replacing an element (JP939/JP969) for the basics to open up the

...logic board (main board) MUX failure. Action: 1) Recycle power to the cooktop. 2) If problem continues, replace logic board (~$250 part) You can read my other entry as to how to open the unit. It ...

...If it does not, there is a problem with the power being supplied to the cooktop. (3) If fault persists, replace power board (4)If fault persists, replace main (Logic) board and recalibrate

...logic board and measure RTD resistance. Should be 1030-1150ohms. If not, replace heater element assembly (~$130 for part) 3) if fault persists, replace logic board. See my other entry as how to open ...

...the control panel and last the logic board (its on back of front panel ) but I will say id unplug it till I resolved this problem if it turns itself on and your not home ,what could happen

logic induction hob works well untill i put the lock on and then it shows lo and won't work again, untill i disconect from mains for a few mins then it works again? can you help. then quit putting the

My logic schott ceran just keeps bleeping for hours and wont work till it has stopped can you please help You might try this link ...