logic board 4 - 6 5 - 7 6 - 8 7 - 9 8 - 10 9 - 11 10 - 12 I have the same problem - The power supply is providing 12 VDC I'm assuming that the backlight isn't a problem The capacitors do look a little
Question about VA720 17" LCD Flat Panel Monitor
...power cord, the green power light go out, can you help? Ichecked the power supply its good. Larry replace the logic board, not the power supply board. you can find logic board on ebay as low as
Question about VA550 15" Flat Panel LCD Monitor
...Logic Board Caps on Logic board "appear" normal; no bloating/bulging, no leaking, no discoloration of logic board due to over-heating. Any ideas? Buy a new monitor!! Seriously, unless you're the ...
the screen in darkened room then the T-CON board is bad or it is not getting the 12vdc from the main logic board. Need to use logical troubleshooting before buying the wrong parts. Hope this works....
...logic board that supplys the power to the T-CON board. Learn more here: Basic LCD monitor troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting Failed TV and ...
...logic board filter's missing on logic input board check for fail signal on video input logic board,,, check input connector for broken pin inside connector... also check capacitor & resistance ...
Question about N2635w 26 in. LCD Television
...barely turn it on and bought it brand new 2 years ago. its only connected to a direct tv box and the wall. Please help sound like main logic board bad, google your set and main board and check ...
...logic board and the T-CON board, or the T-CON board is bad which means you will need new LCD panel, or the logic baord is not feeding the 12vdc to the T-CON board. Basic LCD monitor and TV ...
...logic board and the LCD panel may have come off, or the board (T-CON) on the LCD panel failed, or the LOGIC board is not sending 5vdc to the T-CON board. Repair shop will charge you around $100 plus ...
Question about Graphic VG2021m LCD Monitor
logic board. The firmware thinks that there is a DVI connector installed. Such problems with other devices are fixed by reflashing the firmware. But I don't see any connector on the board for that
Usually answered in minutes!
131 Questions
123 Questions
121 Questions
112 Questions
121 Questions