Questions & Answers for: remove jacuzzi bathtub

pump wont turn on switch doesn't have pressure how do you replace hose You will have to contact the manufacturer for a service manual for your unit. Do you have an access panel. Usually the apron can ...

jacuzzi whirlpool jetted tub. The magic control air switch will not work. If I remove the side panel and disconnect the small air tube a small puff of air will both turn on and turn off the tub. Where

How do you remove the front access panel to check for leaking? should be able to either push down or up on skirt..has clips that hold it together bottom or top>>are longer shorter to allow ...

...remove the handles on my Jacuzzi waterfall There is a cap on the top of square knobs that you have to pry off with a tiny thin blade. Under that cap is a screw that will allow you to remove the

remove Jacuzzi Waterfall handles to get to the valve. There are no visible screws?? On the top of each handle you will need a very small flat head screwdriver or something similar to "pop" the top cap

...the handle end of a screwdriver to push to switch. How do we get to the switch to repair it, do we remove the top plate and how to we access the screw to remove the panel. Check with these guys - ...

How to remove a broken jet Escutcheon on my spa Most jet escutcheons un-thread counter clockwise. Rod US Parts Center

need to see how to get the switch on/off switch removed from the tub The air button is located on the top lip of the bathtub or just below the top lip on the sidewall. It is held in place by a nut ...

need to know how to remove the on/off switch from the tub how do I remove the switch What kind of switch are you referring to? Rod US Parts Center

How do you replace jacuzzi 3 Position Control Panel Kit? 3 position control panel here is a sheet with instructions that show how to remove the graphic rings that hold the buttons in place.