Questions & Answers for: hotpoint wma62

SOAP DISPENSER HOSE WHAT IS THE EASIEST WAY TO CHANGE THE SOAP DISPENSER HOSE TO THE DRUM ON WMA62 take both star screws from under lugs on either side of the lid remove that then take soap drawer out

WMA62 Won't Progress Through Programme after looking at a similar post on here I thought the problem with my WMA62 was down to blockage in the waste system somewhere, after removing, cleaning and ...

Need a wiring diagram for main circuit board plugs on WMA62 Hotpoint washer these plugs are keyed so they can not be wrongly connected

Hotpoint washing m/c WMA62 - door won't open The door is locked and water is still in the drum. The cycle says complete? I've tried various cycles to see if the door unlocks at the end but now water ...

hotpoint ultima extra wma62. The drum doesn't turn anymore - even manually. I have tried taking it apart but cannot get access to the back to the drum - to check the spider and brushes. I have removed

Hotpoint WMA62 front door will not lock The door does not click If the door locked light is flashing then you probably have a control module problem. You could try a new door lock but I don't think ...

Hotpoint WMA62 door will not lock I have replaced the itter and outer doors for Hotpoint WMA62 (genuine HOTPOINT parts) but the door will not lock and machine will not start. Why is this? Sounds like ...

hotpiont wma62 not washing machine fills with water ,then the drum makes two revolutions then stops and empties check the motor brushes and connections to the motor the fault is logged as motor action

Hotpoint WMA62 shaft removal How do I remove the shaft / spindle from my WMA62 washing machine do I just knock it out or is there a tool I require ? Regards, Brian. draw off the spider with a pulley ...

...WMA62 Hotpoint comes on, you My washing machine a WMA62 Hotpoint comes on, you can set the programme which appears to run however after about 10 minutes it just drops back to the on condition? that ...