Questions & Answers for: hotpoint microwave display

Hotpoint RVM1425BA-003 Microwave Oven Stovetop Light Does Not Work The stovetop lights on my Hotpoint RVM1425BA-003 Microwave oven have stopped working. I replaced the bulbs with new 25W bulbs (less ...

F 4 My oven beeps and displays F4 F4 code on a Hotpoint (by GE) indicates a failed humidity sensor. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting

microwave shut down, including the display. We have plugged other appliances into that outlet to verify that the outlet is in working order, which it is. Any ideas? The fuse inside microwave is blown.

The timer screen on my Hoptpoint microwave keeps going blank or displaying gibberish. I can reset the clock but it keeps happening. What is wrong? See this solution.

display says LOCKED What does LOCKED mean ? Hello, I can not find a copy of your manual, but I think it could be a child lock that has been activated. Check out your manual for child settings. Regards

...Hotpoint over the stove microwave model RVM1325WW003. Its clock frequently goes blank and needs to be reset. I reset the clock and it works fine for a few days but then it happens again. No other ...

Microwave does not work at all. Shows "PF" in display. "PF" on the display is an indication that your oven experienced a power interruption. Normally, the error code can be cleared by ...

...Hotpoint microwave means you have a shorted membrane keypad. On RVM1435-series microwaves, the membrane keypad is not available as a separate part, so you would have to order the control panel frame ...

hotpoint microwave only works a few seconds then shows all 8s in the display Sounds like its time for a new microwave You can probably buy a new one cheaper then fixing the old one Most controls that ...

...hotpoint microwave beeps and the display says -F3- "F3" means you have a shorting membrane keypad. I regularly repair these controllers and details are here. If you have other questions, it's best to ...