Questions & Answers for: hotpoint aquarius washing machine hot

Ad

Question about Aquarius WD63 Front Load Washer/Dryer

2 Answers

hotpoint wd440 aquarius will not let in hot water? only cold through the soap dispenser then starts cycle Not all programes fill with hot water.Try on 95 degree wash if it takes hot water ,you are ...

Ad

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

washing machine my washing machine washes everthing in hot water even when on a cold wash it even rinses in hot water ive checked the cold water pipe is conected and is turned on This is a Hot and ...

Ad

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

hotpoint aquarius wd640 my boiler has broke so could you tell me if my washer drier is a hot or cold water fill Most washers made today, are cold fill only, best way to check is look at rear of washer

Question about Aquarius WD640 Front Load Washer/Dryer

4 Answers

...machine have two cold feeds There are 2 versions of the Hotpoint WD640, a cold fill only version, and a hot and cold fill version.. From your question, I conclude you have the hot and cold fill ...

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

...washing machine keeps filling up with water even on spin cycle Your Fill valve Solenoid has failed. Some machines have an all-in-one type fill valve (hot and cold on the same valve - but different ...

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

hotpoint aquarius wf 640 We have the above washing machine which is fed with hot and cold water, But due to moving the machine to another room we no longer have hot water pipes in that room, is it ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

...aquarius 1100 - does this have a heating element for cold water feed ? or does is need direct hot water feed ? (there is a inlet at back for both hot and cold so presume no heating element ?) All ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

...hotpoint aquarius require hot and cold supply to washing machine Depends on the model, and when it was manufactured. If there is only 1 inlet valve connection at rear of washer, then it is cold fill ...

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

...washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips... Washing Machine Problems No Water ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

hotpoint aquarius will not heat water Hi, Although I do not know your particular machine I strongly suspect that the heater element is malfunctioning/broken. Even if it is a hot and cold fill it still

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...