Questions & Answers for: Ford Ranger hot water heater oil working

Question about 2003 Ranger Regular Cab

3 Answers

...hot water flow" but controlled by a flapper door that allows hot air exit to cab by flap position for heat temperature control??. I'd start by bleeding the system by applying water to the radiator ...

Ad

Question about 1991 Ranger Supercab

3 Answers

hot, and the valve is working, what is the condition of the coolasnt? should be green. If its brown/rusty,the heater core could be plugged. you can flush the core using a water hose. Flush the cooling

Ad

...to let the hot water to go around the heater system so you get hot air,,, and when you turn the switch to cold it turns off the flow of water to the heater and so it blows cold. Have a goodday ...

...hot, I would use a heavy oil, like 10-40 trans: where is the leak? If pan, tighten bolts. seals are much harder repair water leak: possibly a freeze plug. Maybe you should pull the tranny and fix the ...

Question about 1987 Ranger

1 Answer

...way they should. but no heat comes out only cold air. even when you manually open the valve on the heater hose. Hot water will pass but no heat in the cab. It seems as though it is a vacuum

Question about 2008 Ranger

1 Answer

water level in the radiator due to a leak in the cooling system. A bad thermostat that isn't allowing the engine to properly warm up.11 Dec 2013 Why Isn't My Car Heater Working? ' Angie's List https:/

...by the HVAC control head, the is a vacuum leak to the control valve or the heater core is plugged. Your vehicle may or may not have a valve that controls the flow of hot water to the heater

...hot. That means either you have a vapour lock, your water pump has failed, or your thermostat isn't opening. It is not easy for a non-mechanic to put coolant into a vehicle... more often than not you ...

...water pump,trhemostat the heater does work , ithought it was heater core,we have done all we know Are the heater core hoses hot? If so then you will need to replace the air temperature control blend ...

...water pump is NOT hot, while the hose going to the heater core from the thermostat area IS hot, then the heater core is plugged probably. You need to remove the heater hose while cool,from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...