...treadmill will not work. I have incline, but no movement on the walking belt. Verified voltage to motor, had 120VAC from AC hot and 66 volts on the hot (A+) to motor controller. Still nothing. Not ...
Question about Vision Fitness T9500 Treadmill
...control panel is dark screen. Not responding. Belt was very hot last useage It may have tripped thermal over load. Check for a manual reset on the lower front by where the cord connects to
Question about Quick Burn Pro Treadmill with 12 iFit Workouts
...treadmill and run or walk, after 2 mins the motor turns off, why? This machine has what they call a thermal switch. It is designed to shut the machine off if it gets too hot. This heat is caused by ...
Question about S600 Treadmill Motor Control Board : 152004
...treadmill stops abruply after 20 minutes or so. what can be the problem / This machine has what they call a thermal switch. It is designed to shut the machine off if it gets too hot. This heat is ...
...hot. This heat is caused by friction. Friction is caused 99% of the time by the walking belt or the drive belt. If it is the drive belt then it can be solved by either applying a treadmill lubricant ...
...hot You will want to check the condition of your belt and deck. When a running belt has excessive wear, it creates a lot of friction which causes the drive motor to work harder. When the drive motor ...
...Hot After walking on the treadmill for about 25-30 minutes the Baldor Industrial Motor starts to heat up...by 40 minutes it is real hot (starts to smell)..walking speed approx 3.8 and tilt at 2..All ...
Question about Fitness 725T Plus Treadmill
...Treadmill. It gets hot after about 30 minutes of Cardio workout. Any suggestions to fix this? It has also become noisy recently. I have already tried lubrication. If your Merit 725T Plus Treadmill is ...
Question about Fitness 725T Plus Treadmill
...treadmill get too hot, the machine may shut down to prevent damage. Make sure that the treadmill is placed in a well-ventilated area and that the air filters are clean. You can also try lubricating ...
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions