...a problem with the automatic temperature control. Here is the problem. If I select cold/cold, I get hot water for wash and rinse. If I select ATC cold/cold, I get hot water for wash and rinse, If I ...
MODEL # SAV5701AWW MY WASHER WILL NOT EXCEPT HOT WATER. iF I PUT HOT WATER ONLY IT WILL NOT GIVE ME ANY HOT WATER AT ALL. nOW ITS STARTING TO LEAK WATER.aND IN THE SPIN CYCLE ITS MAKING A LOUD NOISE! ...
Maytag performa washer hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just ...
Washer does not allow hot water to enter machine when you press the heavy duty button. Regular warm cycle or hot works fine. Replaced the water valves, main control panel. Hi, This is a common ...
Question about Neptune FAV6800AW Top Load Washer
Getting hot water only into the tub. Is that a bad mixing valve? Where can I get one for a VERY old Maytag Washer? The cold water valve could be faulty. It's quite possible that the valves haven't ...
Question about Atlantis MAV6000 Top Load Washer
hot water does not fill in the washer. The spicket has hot water. There is an obstruction after the shut off to the hot water hose that feeds the washer. Shut off the hot water, disconnect the hot ...
MAYTAG dryer LDE7500ACW is too hot What part to replace Hi, The cycling or operating thermostatis often the problem when a dryer runstoo hot, but there are also other things that can make it run hot ...
clothes seem to get too hot Hi, The cycling or operating thermostat is often the problem when a dryer runs too hot, but there are also other things that can make it run hot also. Here is a tip that I ...
HOT and COLD blending My top load Maytag Legacy series is not blending hot and cold water correctly. I have already replace the temperature control device to fix a different problem. The COLD only ...
Question about MAV9600 Top Load Washer
MAV9600EWW Water temperature changes from warm to hot During fill, if WARM/WARM or WARM/COLD is selected, filling temperature is WARM for about 20-30 seconds after which is flips to HOT and stays HOT.
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions