Questions & Answers for: horizontal lines infocus projector

Question about ScreenPlay 7205 Multimedia Projector

1 Answer

...horizontal. these thin white lines are vertical on image and are in proportion to each other. I tapped on the unit and the lines went away then came back shortly. There is also a 2 inch black bar ...

Ad

Question about ScreenPlay 7200 Multimedia Projector

1 Answer

Horizontal lines rotate from infocus 7200 lines keep on rotating on screen. Unplugged the unit.

Ad

...InFocus IN36 Projector displays only narrow horizontal band of light on screen do you have any ideas What you haveis most likely a horizontal collapse, You will have to take the unit in and have it ...

...horizontal lines about three inches in width that flicker from the top to the bottom of the screen. The connection between the main board and the dmd board might have some dust in the connection. If ...

Question about IN36 Projector

1 Answer

...Horizontal lines I have a infocus IN24 projector in use with a smartboard. There is a horizontal line, repeately scrolling across the screen This usually happens when some other appliance is causing ...

Question about IN72 Multimedia Projector

1 Answer

...InFocus IN72 Projector, when it projects on the screen a half inch vertical crystal line appears on the left side of the screen. Some times this line become solid white, and it nevers goes away. I'm ...

Question about ScreenPlay 5700 Multimedia Projector

1 Answer

...horizontal line across entire screen, comes on after 5 to 10 minutes...goes away and comes back this could be the main board or the dmd board on the light engine. you can try disconnecting, cleaning ...

Question about ScreenPlay 5700 Multimedia Projector

1 Answer

horizontal line across my infocus home theatre projector everything else works fine, this happens approximately 15-30 minutes into any movie You have to clean LCD panel cable joint that is inserted in

...horizontal colored lines (very faint) that goes from bottom to top of the screenolling horizontal line going up 1,the interface between the mother board and DMD drive board 2,to clean the the ...

Question about INFOCUS Projector Lamp Module for LP815 Part No SPLAMP012

1 Answer

horizontal lines (very faint) that goes from bottom to top of the screeen 1,the interface between the mother board and DMD drive board 2,to clean the the interface with some alcohol 3,securely plugged

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...