Questions & Answers for: hoover washer spin dryer

Hoover WDM120 My washer dryer will wash but will not spin or dry. We have checked the belt which is intact. Waht else could it be ? this will be your carbon brushes which are situated at your motor in

...hoover washing mechine that wont do a fast spin it seams to wash and pump water, not shure tho, can u help? Hi, It sounds like it might need new brushes in the motor. Sometimes just before they wear ...

hoover 1300 spin 5+5 washer dryer washing machine will only start on one particular cycle but will not complete no problem with spinning though makes strange noise if selecting different cycle then ...

...Hoover washer/dryer spins for a bit then stops. There seems to be a grinding noise and when I took the back off and switched the drying mode on I noticed a strange flashing light from the motor, as ...

hoover washer dryer saver 1300 the spin cycle is not working it rotates 3-4 times them stops. I have replaced the brushes but it still doesnt spin. any further ideas?? I have inherited a hoover saver ...

hoover HNF 6147 after 10 mis the lights start flashing and the machine wont go any further in to the pro gramme. If you start it again just on spin it will empty and do a full spin have now fixed this

...hoover ultracare 1600 washer dryer, model number HW6316MUK. Recently whilst spinning the machine was making noises and now the machine does not spin at all. When the drum is supposed to be spinning ...

Hoover 1600 Saver Washer Dryer not taking conditioner from tray I have had the Hoover 1600 Saver Washer/Dryer for just over 5 years now. It used to automatically take the conditioner from its tray ...

...hoover hd vision washing machine will start washing and then give up half way when a light flashes 3 times and it will display timer saver on it .than k you deb my hover washer dryer 1200 spin will ...

...Hoover Washer Dryer WDXOC 485A/1-80 The machine wouldn't spin so took the back off and the belt had come loose. We've put it back on and the drum spindle spins OK but the drum itself is not turning ...