Questions & Answers for: how to hook up a solenoid

...CORE HOSES. I HAD TAKEN A FEW THINGS A LOOSE AND PUT EVERYTHING BACK AS I KIND OF REMEMBER AND I HOOKED UP THE SOLENOID SWITCH AND STARTED THE TRUCK BUT MY STARTER KEPT SPINNING. I THINK I MAYBE ...

...hook up the wires correct to the solenoid, battery and push button switch to start engine... OK ,Batt + to one of solenoid large post Cable from solenoid lrge terminal opposit batt cable, to starter ...

...gear to position the fork as close to the solenoid plunger as possible. Hook over the fork, Re-insert plunger into solenoid 'a light film of grease could be applied to the plunger, but not TOO

solenoid on the pos. cable. I assume you just hook it straight up to the bat. right? The heavy + should be connected to the battery through the solenoid for the motor. There should be wires to control

SOLENOID POSITIVE POST TERMINAL,HOOK THE REMOTE SWITCH OTHER WIRE TO THE STARTER SOLENOID S OR SWITCH TERMINAL YOU WILL SEE LETTER S ON SOLENOID.THEN PRESS REMOTE SWITCH IF STARTER KICK ON SPIN STRONG

...hooks up to the starter solenoid picture i need to connect ,my new battery back up i don't know where to hook the cable to the solenoid starter It would be the larger stud on the

I have fisher plow starter motor hooked to solenoid but when i hook solenoid to battery it sparks why? The solenoid if bad try bypassing the solenoid if the motor spins then it ois bad

...starter case and your starter wires hook up to the pos. and neg. terminailes the thing your wires hook to in a nut shell is your starter solenoid On a 2000 ford explorer xls where the silonoide ...

...hook pos to neg and neg to pos Sounds like someone has changed the starter recently and they have the negative cable from the battery hooked up to the starter solenoid. You need to have the positive ...

...I look forward the problem? Had the starter tested solenoid popped out each time,got the hot wire hooked up right and the solenoid wire hooked up correctly How old is your