Questions & Answers for: hood latch cable replace

hood latch to disconnect or reconnect a new cable. There are two cooling radiator fans in the front under the metal piece holding the latch. I removed two screws which loosened the latch just a little

Ad

...HOOD LATCH CABLE REPLACEMENT Remove the following items: Hood release handle. Radiator guard. Hood latch. Wheel guard. Using a clip remover, detach the clips from the body, then remove the hood latch ...

Ad

Hood won't latch completely. Cable has no tension. I have a 2001 Toyota 4 Runner. I'm afraid that it may fly open completely when I'm driving freeway speeds. Can anyone help? The hood latch is one ...

Question about 1998 4Runner

2 Answers

...hood latch. The latch strike bolts usually have slotted holes to allow for adjustment. If you loosen them slightly, and then close the hood, it should align itself, then open the hood carefuly and ...

...hood latch cable has become detached so how do I get my hood open? the latch to my car hood has become detached and I need to get under the hood to replace the car battery. How do I open the hood if ...

Question about 2004 Forenza

1 Answer

Hood latch won't latch when closing Hood latch won't latch when closing Raise hood,have some one go pull hood latch and you look at latch and see if it releases,if it doesn't then ...

...hood latch cable. 1998 Saab 900 SE has broken hood latch cable. How do I get the hood open to replace the cable? Here's a video Dan Hooper suggested as a solution to your problem from YouTube:Opening ...

Question about 2000 Tacoma PreRunner

1 Answer

hood latch My hood wont latch shut. First it wouldn't open because the cable got disconnected from under the steering wheel, so I re-connected it. Now the hood wont close. Replace the hood release ...

hood latch cable on a Mercedes 2000 E430. I have replaced the hood latch cable but it does not open the hood from the inside. How do you adjust it so it works. you replace the cable and now you closed

...hood latch will not release for one of two reasons. Firstly, the latch is gummed up with old grease, and secondly the cable is kinked and does not release the latch. I is also possible that the latch ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...