Questions & Answers for: Jeep Cherokee hood latch adjustment

...most people are willing to do, but it worked for me. You can try to get to the hood latch from under the front of the car. It won't be easy but with something long you may be able to pop the

...Hood latch cable broke The hood latch cable is broke. I ordered a new one but need to pop the hood. How can I pop the hood without the cable? look in through grill you should see where cable hooks to ...

...hood latch is stuck The hood will pop : center and drivers side are loose and will open but passenger side will not budge. Side latch is stuck, how can I get it loose. Trying to jump friends car who ...

...inside still indicates that the hood is open. Tried resetting but still blinks. You will have to adjust your hood hinges or the latch part. They all slide just a little when you loosen the

hood latch assembly. if it still won't open, and it's the cable and not the latch you'll have to replace it anyway, so instead of removing the grill, cut the cable behind the pull lever under the dash

hood latch review Section-23-Body-Components-95XJ23 (page 11 and next) I really hope help you with this (remember rated this) Good luck. push down on the front driver side of the hood (right above the

...latch to the hood is stuck and was wondering how to get it open when i cant pull the latch to open it??? any ideas That used to happen to my 85 camaro, I had to have someone pull up on the hood while ...

...hood latch won't open.cable frozen ? frozen or broken. try a good whack on front on hood while someone pulls latch, see if you can free it up. no luck? try pounding at driver's side near the ...

...hood is stuck latch is working u can here it pulling on the two latches own each side but wont release had a battery installed seams to be two big hood is raised own passenger side in the middle of ...

...hood latch cable need to open hood, but release cable is broken. how do you open hood? On hood latch..where cable goes in..there is a hole there..trip it back..or take the 3 bolts away from ...