Questions & Answers for: honda pressure washer leaking

Honda XP2600 - Leaks at tip connection The tips all leak at the connection & they are in all the way. try using a teflon tape before installing the hose.

Honda excell pressure washer does not have pressure Runs fine but no pressure coming from hose. if the machine is running on suction, ie sucking out of a barrel there may be an air leak on the suction

PRESSURE WASHER DOESNT HAVE MUCH PRESSURE, MOTOR DOESNT EVEN KICK DOWN LIKE ITS UNDER LOAD Make sure that the tip of the head is not damaged, or missing anything. Sometimes, there can be a pressure ...

My Honda power washer has a crack in the aluminum part and leaks water. Can this be sealed somehow? You could try JB weld

Honda 3000 psi The pressure valve has stuck in the high pressure position. This prevents anymore inflow and hence no further water will be pumped. Rebuild the valve... There are O Rings to replace and

...honda excel 2500 psi , where would the pressure relief valve be located? Many of the excel units don't come with a pressure relief valve but instead a thermal relief valve, it really depends on the ...

...Honda pressure washer is leaking out of the thermal relief valve and I am looking for a part,I also do not have the manual. The model number is WGC 3030 and it is 3.0 gpm 9.0HP. The number on the ...

...honda on a pressure washer. Bogs down and cuts off under load. checked spark plug, air filter. Any guidance would be much appreciated sounds like the pump has an issue check for restrictions in the ...

...honda gc 190 grey ran pressure washer for about 30 minutes with fresh oil. checked it afterwards and the oil was grey grey oil is water contamination. check for leaking seals to stop water getting to ...

oil leak under machine, how do you tell if pump needs more oil sometime I will find drops of oil under machine Oil is leaking from the engine. Pump does not have oil in it.