Questions & Answers for: honda camshaft sensor

HONDA CRV, it has a code , to change camshaft sensors , i did that , but the car still wont run , it starts and shut's down in 2 sec and sitll has same code , please help me . Thank you OK, you have a

...a 2001 honda odyssey it surges in parking only Very good chance you have a faulty camshaft position sensor. Or, leaky vacuum hose. I would have your engine codes read to pinpoint exact problem ...

...Honda Accord stalled while driving. Tried to restart, engine crank but it won't run. I have to wait for 45-60 minutes before I can restart my car and run again. This happened 5-6 times already with a ...

...honda.htmlCamshaft Position (CMP) Sensor replacing?http://schematicsdiagram.blogspot.com/2011/12/gmc-camshaft-position-cmp-sensor.htmlCrankshaft Front ...

code p1361 on my 2000 civic engin light The code is for a problem with the sensor on top of the camshaft.The sensor would need to be tested.There is a tech service bulletin for the 2001 model.

HONDA NOT STARTING AFTER ECM RESET Resetting the ECM does not lead to any starting problem, though the idle speed re-learning is required. Check carefully there could be something else that is ...

...camshaft sensor, HONDA CIVIC 1997 ENGINE WILL NOT START/ HARD TO START: It is assumed that the engine cranks normally. 1. No fuel supply to injectors: • No fuel in tank • Fuel pump not working • Fuel ...

Honda Accord 2.2 non VTech. Replaced timing belt, seals, water pump, crank sensors. Did not have code before I done work. Now getting p1361 and comes right back. P1361 = Camshaft Position (CMP) Sensor

...camshaft position sensor located 02 honda odyssey Are you getting a check engine light? If so, the sensor is rarely the problem. You need to check that the timing chain didn't skip or stretch. If it ...

...Honda CRV. The codes from diagnostics reported Bad camshaft Sensors and bad crankshaft sensor. I replaced the 2 camshaft sensors and the crankshaft sensor and the motor won’t start. It sounds like a ...