Questions & Answers for: Epson hold button

...and hold the power button, the unit will power off and on again, now release the power button and your printer should be working again. Now you should change your waste pads...... mrdave get a ...

...will shut off. Keep holding all three buttons until the screen stops flashing. 3. Let go of the buttons and press the Color button, then press the Off button and hold until it switches back on.

...button). 6. Continue to hold "Load/Eject" (or "Cleaning" respectively, see step 5) until printer's lights flash, then release button. Printer should now be reset and the "Hidden Counter" of which's ...

...button. Hold it till printer heads make noises, & let it 'initialize'. Then release button, turn off printer, reconnect cable. Should work fine when you turn it on again! All lights flashing ...

...button and hold (4 buttons on hold now and don?t release the buttons until you see the light indicator is blinking. A message will be displayed on the LCD) Release all buttons. Press the Color button ...

...button and hold them 3.) press the power button to power off, still hold 2.) 4.) press the power button to power on, still holding 2.) 5.) the LEDs start to flash, then they stop to flash and the red ...

...buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds. Release all buttons. In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will

...hold CLEANING button for 10-12 seconds. EPSON Stylus Color 3000 Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer. Release all buttons. EPSON Stylus Photo 785, 895 Pressing and ...

...hold the "Stop" button, "B&W" button, and "Color" button all at the same time. While holding the buttons, plug the printer back into the power source. Continue to hold the buttons until the power ...