Questions & Answers for: hitachi ultravision tv ballast

hitachi 55vg825, gets power but will not turn on the tv for some reaseon will not turn on no lights no nothing. so i went by the instruction manual and unpluged the tv for a day. now when i plug in, i

Tv is black and blue light is on with 2 red lights blinking on it and like a sizzling noise Its the lamp or lamp ballast board. Take out the lamp and carefully examine it for flaws or signs of wear. ...

Hitachi Ultravision 50in will power on but no picture or sound!!! My husband replaced the lamp and we were able to check out and watch our new tv that we purchased for the first time!! But after about

...Hitachi Ultravision also makes the buzzing noise and the flashing red lights. I know it isn't the picture tube because it does this sometimes and then other times, it just powers up and works fine. ...

picture on tv just went out and lamp light stays on CK the Fans and Ballast Board for Parts Call Encompass Parts 1-800-638-3328 If the Lamp is OK its the Ballast Board

Hitachi UltraVision VG825 Series 60 inch Projection TV What is the part number of the lamp that I need? And, just to be sure, this is the process of what I do and what happens when I try to turn the T

hitachi ultravision projection that is turning off I have a hitachi ultravision projection tv. It is around 50 plus inches. It turns off about every 10 seconds.Then the picture and sound comes on for ...

hitachi ultravision dlp tv and lamp light flashes and tv will not turn on. Have reinstalled old build and works fine. Is there any type of reset that needs to be set. New bulb no tv, old bulb tv works

were are both of the cooling fans located on my Hatichi Ultravision Dlp tv? Some have cooling fan Located under the light Engine, Lamp Fan,Ballast Fan.on the Ballast Board.

...hitachi ultravision dlp tv look Anon, the bulb/lamp plugs into the ballast, The attached videos shows the ballast and location near the end of the video. Check the attached links. Good luck "I hope ...