projector is blinking red lights for temp and lamp whats does it mean The fan may have went bad. If it's out of warranty you may open it up and try and blow some dust out of the fan to see it that may
...red temp My projector starts up several times before the power light turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any ...
...hitachi projector Hi m8s My projetor is up and down 25cm from the roof I put the new lamp and the airfilter and when i start it It starts lik 2-3 minutes and it shot down...and the power light is red ...
Question about CP-X250W Multimedia Projector
Hitachi CP-X250. Anyway, before I changed the lamp, the projector's fan would start to spin up then power down four times in succession, then the fan would stay on for about 8 seconds then go off. The
...temp lights blink red when i go to turn it on. and then nothin happends... whats the dilio!? thats not a bad thing, just clean air filter. if you have done it, then go to air filter on the menu, then ...
powers up, the fan runs for a few seconds, then stops, this is repeated 3-4 times then the unit stops with the power light red and the temp light red (blinking) one or more of the fans are not working
...A model number helps when asking what is wrong with your projector. hitachi cpx200 projector lamp light comes on red and motor accelerates Where can I buy a thermal switch for a Hitachi
...red. The projector will not turn on. The projector is most likely overheating, you should wait for it to cool down, and clean the dust filters. Make sure the room that it is in is not too hot because ...
Question about CP-X250 Multimedia Projector
...is solid red, the temp light is blinking red, the lamp light is off I don't know how to do that. The power light is solid red, the temp light is blinking red, the lamp light is off sry no ...
Question about CP-X327 Multimedia Projector
...projector is Hitachi cpx1 XGA 3LCD and it has failed to display. the power and temp lights are red but the lanp light shows nothing. Call hitachi service center to fix it. It may have a circuit ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions