Questions & Answers for: hitachi cp x250 power lamp

Hitachi CP-X250 LCD Projector The Temp & Lamp lights are flashing orange on my Hitachi CP-X250 LCD projector. I am assuming that that means that the Lamp needs to be replaced but was hoping someone ...

power light turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights

Hitachi CP-X250. Anyway, before I changed the lamp, the projector's fan would start to spin up then power down four times in succession, then the fan would stay on for about 8 seconds then go off. The

...lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red when i switch on the ...

...Hitachi cp x250 projector powers on and displays and then the bulb turns off after a few minutes, and the lamp light and the power light come on red. Most likely you have a defective lamp or it is ...

powers up, the fan runs for a few seconds, then stops, this is repeated 3-4 times then the unit stops with the power light red and the temp light red (blinking) one or more of the fans are not working

after power is on red light continuously blinks at After power is on red light continuously blinks at lamp mark - lamp does not on might be time for a new globe?

How to reset Hitchi CP x250 projector after replacement lamp The power and temp butoon flash red

The Lamp light and Temperature light is blinking red while the projector is running Clean the filters and check the lamp before it is too late and the lamp bursts or the LCD units burn.

...is solid red, the temp light is blinking red, the lamp light is off I don't know how to do that. The power light is solid red, the temp light is blinking red, the lamp light is off sry no ...